Engine Maintenance Parts

Aqua Power Trim Hose  32-86036 Features: AP#706 MC 32-86036 Mercruiser Stern Drive Power Tilt Cylinder Hose Line      

Attwood 1/4" NPT Male with 5/16" Universal Hose Barb 88FBM101-6 Universal Hose Barb for fuel lines.  Use thread sealant. Features: Description: Male Thread, hose barb Ftting Size:1/4 NPT x 5/16 Barb Material: Brass

Attwood OMC Johnson/Evinrude  Hose Fitting Motor Tank Connector 5/16" 3/8" 88FHE516-6  8889LP6 For use on both ends of fuel line to connect tank fitting and motor. Hose barb fits 3/8" or 5/16" I.D. hose. A quick-connect fitting for use with...

Attwood Yamaha Tank Fitting Side Connector 8897-6 Installs in fuel tanks with standard, 1/4" male NPT thread. Solid machined brass. For use with Attwood 8886 or similar quick-connect hose fittings.  Features: Description: 1/4" NPT...

Attwood Yamaha 5/16 in Motor Tank Connector 88FHY516-6  Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels.  Features: Unless otherwise specified, threaded...

  Attwood Universal Sprayless Connector Tank End 8838TM6 The Universal Sprayless Connector is a safe way to eliminate the spraying of fuel when connecting and disconnecting pressurized fuel hoses during fueling or maintenance. It also comes with a...

  Attwood Universal Sprayless Connector Male and Female 8838US6  The Universal Sprayless Connector is a safe way to eliminate the spraying of fuel when connecting and disconnecting pressurized fuel hoses during fueling or maintenance. It also...

  Sea Dog HDPE Motorwell Drain Tube  520320-1 Drain tubes remove water and fluids from motor wells, livewells and baitwells. Features: Constructed of durable, impact resistant injection molded HDPE or ABS Flanged 90° on one end Fit...

Attwood 3/8" 5/16" Primer Bulbs 93038LP7 93516LP7 Attwood's Patent Pending Multi-layer primer bulb is designed to provide up to 60% more priming output than leading competitors in extreme conditions while exceeding new EPA requirements to prevent fuel...

  435210-1 • Injection molded ABS housing • 12V; 3A; 100 CFM • Fastener: ¼” bolt • Inlet:3” Note: This blower is not ignition protected.